Category: Wargaming

In 1981 my buddy JJ had a sleepover wargaming birthday party when he turned 16.  A bunch of us got together this past weekend to celebrate with 50th birthday with a weekend of gaming.  We managed to fit in 7 miniatures games and a couple of card games in two days of non-stop gaming.

(In the picture from 1981, most of the faces are hidden, but I will identify the faces you can see.  Most of the faces won’t be familiar to the group, and many of the faces are hidden.  Standing at the left is Mike Janes.  He was quite a bit older than us but often hosted games at his house, and he took us to our first gaming convention.  I have been trying to link up with Mike, but he has no Web presence.  Standing (and waving) in the center is me.  Seated below me is Matt Stone.  We have all lost touch with Matt.  To the left of Matt, seated, is Mark Lauzon.  Standing at the top right, with just half his face visible and the other half behind the Elton John glasses, is JJ.  Other folks who are probably in the picture but I cannot identify are John Bice, David Dziadziola, Jeff Dziadziola, and Steve Jarosz.)

From left to right, Nick, Dave, Jimmy, Rick, Mark, JJ (the birthday boy), Duncan, Eric, and David (aka Ook).  I took the picture.

We began the weekend, according to time-honored tradition, with a large Beer and Pretzels Ironclads game.  The Rebs got spanked by the Yanks, having lost most of our larger ships.

Our second game was a 2-1/2 lap chariot race using the rules Roman Circus.  Nick won the game easily, having come from behind.

While I was setting up the next game, most of the guys played Red Dragon Inn.

I ran a WWII GAMER scenario, which involved the heavily outnumbered Germans attempting to delay the advancing Americans.  The Americans had to get at least 10 figures off the table by the end of the 15th turn.

Retrograde missions are hard, but the Germans eeked out a victory, because the Americans only got five figures off the table by the end of turn 15.  Another five figures were close — but no cigar.

We set up Duncan’s game for the next morning and then went to bed.  Early Saturday morning we played a reprise of Duncan’s War of 1812 GAMER scenario from Christmas.  The Americans raided a British encampment.  Initially the Brits were outnumbered two to now, but Duncan and I each had a squad of reinforcements that arrived in time to turn the tide of the battle.  It was declared a clear British victory.

The game was quite fun.  Playing a second game with the same rules (GAMER) was good, because it was easier for many of the folks who only game once a year (or even less frequently) during JJ CON.

After Duncan’s War of 1812 game, Eric ran his Orc’s Drift fantasy game using GASLIGHT.  It was a tense, hard-fought battle, but in the end the good guys were able to withstand the assaults of the misunderstood bad guys.

We cleaned up Orc’s Drift and played another chariot race.

I was set to win the second chariot race, but my last movement roll was dismal and I barely made it across the finish line.  Dave came from second place to win.

Our final miniatures game of the weekend was a thrown-together X-Wing scenario.

The rebels were attacking to knock out the three laser turrets on the surface of an Imperial station.  This was the first time I had used the laser turrets, and I think they worked well.

The rebels knocked out one turret and damaged the other two, but they did not achieve their objective of knocking out all three.

After we cleaned up, it was about 10:30, so we elected to start a “short” game of Nuclear War (by Flying Buffalo).  The game dragged on until after 1:30 in the morning, so none of us got much sleep.

All in all, it was a good weekend of gaming, laughing, and fun.

As I continue to await the arrival of my 28mm Winter War figures from the Kickstarter campaign, I have been clearing out various odds and ends from my unpainted lead box.  Last weekend I found these pulp figures and knocked them out.  It was fun to paint a few one-0ff figures instead of a larger project for a change of pace.

I love this guy holding the brain in his hand.

I have no idea who made this cowboy figure, but I like it.  It was a flea market find.

When I was running my Tunnels and Troll campaign as a cadet, I made a typo in the description of one of the rooms.  I meant to say “guard” but instead said “gurad.”  From then on, these armored ducks who patrolled the halls of The Dungeon of the Athelfrog were known as Gurads.  You actually had to pass a saving roll the first time you saw one or you would fall on the floor in a spasm of incapacitating laughter.

I have no idea who manufactured this figure.  A buddy found it in a flea market bin many years ago.  It has been languishing in my unpainted lead box, because I had designs on making a mold and creating a full unit.  I finally abandoned that idea and painted it.  Does anyone know who made this figure?

As I have been recovering from knee surgery, I haven’t been too productive in terms of hobby painting.  As I began to feel better I found a small box of unpainted figures I had forgotten about — a mishmash of things that went into a box during our last move.  In addition, I prepped and painted six giant ants from a short-lived line of figures from Steve Jackson Games that Don Hogge found while cleaning out his basement.

One of the items I found was a bag of Old Glory figures from my last subscription to the Old Glory Army.  These were “make your own robots.”  They came with ten torsos and lots of legs and heads.

I had a rough night last night trying to sleep.  After a few Aleve, I was finally able to get some sleep.  When I woke this morning, I wasn’t in the mood for any detail painting, so I just dry brushed the ants.  I also mostly dry brushed the robots and then painted in a few details here and there.

The robots from Old Glory are pretty nice figures, but my camera pictures don’t really do them justice.

Last night would have been a Traveller night for those in the HAWKs participating in Eric’s campaign, but not enough players could make it, so Eric suggested that I host a game at my house.  I recently had knee surgery and am still not too mobile.  We pulled together a couple of folks at the last minute, and I hosted the game.

The objective of the game was for the pterodactyl “bomber” to get across the table.  It had limited mobility and had to weave back and forth across the table to avoid stressing the pilot.

I used a very slightly modified version of X-Wing for this game.  I found a site that let be build tailored order dials and another to build the pilot / ship cards.

I placed a few mountains on the table to add a little interest to the table and a few obstacles around which to fly.  It turned out that the “bomber” got too close to one of the mountains while trying to avoid the onrushing griffons and eagles and took some damage.

While the “bomber” could sustain twelve hits, that wasn’t enough.  An American with a Garand did the last point of damage, and the pterodactyl fell screeching between two mountains.

I think the sides were pretty evenly matched.  The Germans had slightly better pilots and several auto cannons that were big killers.  The Allies had numbers on their side, and even the Brits with their bolt-action rifles were able to get in a hit or two.  Very little tinkering is necessary to be able to run this game at Cold Wars 2015.  I made some mistakes on the German pilot / ship cards that I will correct.

In a previous post I showed pictures of my recently completed Griffons, American Eagles, and Stukasauruses for my Cold Wars Secret Weapons of the Luftwaffe, USAAF, and RAF game.  I mentioned that I intended to use a slightly modified version of X-Wing for the game.  I found a cool site that allow you to make custom movement dials.  From that site, I made these:

I plan to print them on card stock and find some fasteners that will allow them to spin.  They should be good enough for one or play tests and the convention game.

I found another site that lets you build the ship/pilot cards, but a lot of the words are in French.  Hopefully I’ll find a similar site in English before long.  Otherwise, I’ll have to make up cards myself — which shouldn’t be too hard.

 

Despite recent knee surgery that had me flat on my back for a couple of days this week, I have managed to finish up some projects that have been in progress for a couple of months.  I finished the last 80 of my 10mm fantasy figures!  But this post is about my upcoming Cold Wars 2015 Secret Weapons of the Luftwaffe, USAAF, and RAF game.

In previous posts I showed pictures of the Eureaka German “Stukasauruses” and the Americans riding on giant eagles.  To go along with those forces, I wanted to put together a squad of British infantry riding on griffons.  Once again, Major Objective games came through with custom assembled and painted Brits.  The griffons were from Reaper Bones.  I used those griffons, because the plastic material from which they are molded makes it very easy to cut off the bases to make them look like they were flying.

GW style flight stands are pretty expensive.  I bought a bunch of 1/8″ clear plastic rod from an on-line hobby site and cut it into two-inch lengths.  I bought two-inch diameter MDF disks from the guy at the HMGS East conventions who sells self-serve Chinese takeout boxes full of bases.  A little work with a drill put correctly-sized holes in the bases and griffons.

In this picture you can see the American on giant eagles (left) chasing the giant pterodactyl “bomber,” Brits on griffons (right) attacking the bomber from the front, and the German Stukasaurus (center)  “fighter escort.”

You can see the control levers and the turret I made to fit on the “bomber.”  The turret can rotate.

When I run this game at Cold Wars, I plan to use a slightly modified version of X-Wing.  I think the pterodactyl will have the stats of the Princess Leah shuttle, including the range-five weapon.

 

Last weekend I spent most of Saturday helping the software folks on a First Robotics Team.  I still managed to get a little painting done on Sunday.  I am still banging away at trying to clear all the 10mm fantasy figures out of my unpainted lead pile.  Along the way, however, I also finally decided to paint this tank gray.  It has been sitting on my painting table for months waiting for me to decide.

I worked to knock out the few remaining Pendraken figures I had left from a batch Chris acquired from Ebay.  The figures seem a little large for 10mm, but they are good enough looking dwarfs for my tastes in fantasy figures.  (After all, how realistic to fantasy figures need to be?!)

Heavily armored and armed dwarf knights?  How slow do you think these guys are going to be on the table.  Find a place you want defended and concentrate on other units.

Some of these spears are a bit flimsy.  I lost one just popping them off the popsicle sticks I use for painting.  After a couple of games, they might become angry geriatric dwarfs with canes.

I don’t know what these figures are really supposed to be, but I decided to paint them in garish colors and call them orc berserkers.

I still want to add a little landscaping to this base, but I like the way he turned out.

I’m not sure when these forces will see action — or if they’ll see action — before our large Bear Yourselves Valiantly game at Cold Wars 2015 in March

I have been working for over a year on a Weird World War II project involving the Eureka “Stukasauruses.”  In an earlier post, I showed the American infantry riding on giant eagles.  I am also mounting Brits on flying griffons.  The scenario I will run at Cold Wars 2015 will involve this giant pterodactyl carrying secret mega bombs to some key Allied facility.  The pterodactyl will be escorted by Stukasauruses.  The Allies will attempt to shoot it down.  I plan to use somewhat modified XWing for this game.

It is not done yet — end the title of the post, “work in progress.”  I plan to add some straps as details and also add a dual machine-gun ball turret on the platform on its back.

For ease of transport, I glued a piece of magnet to its back.  The weapon / driver platform is on a piece of metal which will be affixed to the magnet during game play.

I’ll post more pictures when I get it finished.

 

Two days ago I posted pictures of Betty’s pie stand for my pulp village.  Last night I finished Bob’s Burger Wagon, the second Ainsty kit available through Recreational Conflict.  As with the pie stand, this kit assembled easily.  The notches in the roof are a little small for tabs on the sides of the wagon for was removal during game play.  I had to widen them a little.

Most of the decorations were made in PowerPoint, printed on card stock, and glued to the sides of the wagon.  This wagon and Betty’s Pies will make a nice addition to the Frosty Bar in the park near the center of Granville.  The cub scouts are from Reaper Chronoscope, and “Bob” is from Pulp Figures.

At Fall In 2014, Recreational Conflict sold this MDF building.  It is for their line of figures for British football hooligan games.  I guess the game has been deemed as offensive in the UK for portraying football violence as a game.  So gassing thousands of folks on the Western Front is okay, but beating up a few people at a soccer game is not.  Anyway, Recreational Conflict has two buildings.  This is one that I finished today.

This kit went together easily — even without instructions — and painted easily.  I don’t know the manufacturer, but it wasn’t pre-painted like the 4Ground ones.  That’s just as well, because I could paint the exposed tabs in the same color as the rest of the building to avoid that look of the 4Ground buildings.

The roof comes off.  I plan to add this to the park in my town (Granville) I use for pulp games.